PRODUCTS
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
The thread specification range of rebar is generally 6-50mm. We usually involve more are 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 32mm, 36mm, 40mm and so on. National allowable deviation :6-12mm deviation in ±7%,14-20mm deviation in ±5%, 22-50mm deviation in ±4%. Generally, the fixed length of rebar is 9m and 12m, among which 9m long thread is mainly used for normal road construction and 12m long thread is mainly used for bridge construction.
Reinforcing Mesh is used for reinforcing thin concrete elements. Rectangular mesh is commonly used in projects that require higher tensile stability to maximise concrete strength and minimise concrete cracking, such as pavements, flooring, precast panels and suspended flooring.
ASTM A615 Reinforcement Bar Grade 80
ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.
ASTM A615 Reinforcement Bar Grade 75
ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon
Epoxy resin coated steel bar is an epoxy resin protective coating prepared on the surface of ordinary steel bar by electrostatic spraying powder high temperature sintering process. The coating has excellent chemical corrosion resistance and does not react with acid and alkali.
Galvanized reinforcing steel is bare reinforcing steel coated with a protective layer of zinc metal. The zinc coating serves as a barrier to corrosive elements that the rebar is exposed to when embedded in concrete.
HRB600 High Strength Hot Rolled Reinforced Bar
HRB600 steel bar is a new type of hot-rolled ribbed steel bar with high strength and good ductility. The use of HRB600 steel bar in engineering presents advantages such as saving steel bar usage and facilitating steel bar layout.
ASTM A615 Reinforcing Bar Grade 60
ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon
HPB300/HRB335 Reinforcement Rebar
HPB300 grade: The yield strength of steel bars in this grade is 300MPa, with high plasticity and toughness, suitable for general structural reinforcement and stirrups. HRB335 grade: The yield strength of this grade of steel bars is 335MPa, with high strength and good ductility, suitable for general structural reinforcement and stirrups, especially for projects with high strength requirements.
CONTACT US
